Samsung Galaxy S2 Official Android 2.3.5 Gingerbread Update I9100XXKI3 Stock ROMs

The official release of Android 2.3.5 Gingerbread for Samsung Galaxy S II I9100 is finally rolled out by Samsung. The firmware build number is I9100XXKI3 same as the  leaked version. The first public released was pushed out already over Poland, Hong Kong and Taiwan. Other region all over Europe and the rest of Asia will get the said official update sooner and this report has been confirmed by samfirmware kies update.
The firmware build date was still the same from the leaked version which is September 15, 2011.

Galaxy S 2 Official Android 2.3.5 Gingerbread Update I9100XXKI3
The below files are the Android 2.3.5 Gingerbread I9100XXKI3 update that has been pulled and filed by Intratech over XDA-Developer. These files were the original, official and unmodified version since Intratech is one of  most knowledgeable about Galaxy S2 firmwares.

I9100XXKI3
Firmware info
PDA: XXKI3
PHONE: XXKI3
CSC: XEOKI3
Version: Android 2.3.5 Gingerbread
Buld Date: 15/09/2011

XEO (Poland): http://www.multiupload.com/XTRG43JVEG

XXKI3 Stock Kernel: http://www.multiupload.com/6XT83N1LLN
Password: intratech@XDA

I9100ZSKI3

Hong Kong I9100ZSKI3/I9100OZSKI3
Taiwan I9100ZSKI3/I9100OZSKI3

Firmware info
PDA:ZSKI3
PHONE: XXKI3
CSC: TGYKI3
Version: Android 2.3.5 Gingerbread
Build Date: 23/09/2011

TGY (Hong Kong): http://www.multiupload.com/LAWZ135UF3

ZSKI3 Stock Kernel: http://www.multiupload.com/RH5K6JPH44
Password: intratech@XDA

Languages: The XXKI3 default is Polski for this firmware was officially released in Poland and other European languages are as follows:
- Čeština
- Dansk
- Deutsch (Deutschland)
- Deutsch (Österreich)
- Deutsch (Schweiz)
- English (Australia)
- English (Ireland)
- English (New Zeland)
- English (Sout Africa)
- English (United Kingdom)
- English (United States)
- Español (España)
- Español (Estados Unidos)
- Français (France)
- Hrvatski
- Icelandic
- Irish
- Italiano
- Kazakh
- Latviešu
- Lietuvių
- Macedonian
- Magyar
- Nederlands (België)
- Norwegian
- Polski
- Português
- Română
- Slovenčina
- Slovenščina
- Suomi
- Svrnska
- Türkçe
- Ελληνικά
- Български
- Русский
- српски
- YKPAÏHCBK
- 한국어
Note: this may contain errors.

 The ZSKI3 default language is Chinese since this was also an official released in Hongkong and Taiwan and other languages from Asian countries were also included. You can use and flash the said stock ROM to any Global version of Samsung Galaxy S2 I9100 by  using Odin multi-downloader tool.

Arabic Android 2.3.4 Gingerbread S5570JPKQ8 Stock ROM for Samsung Galaxy Mini S5570

The Arabic stock ROM Android 2.3.4 Gingerbread for Samsung Galaxy Mini S5570 is now available and released by samfirmware.com. It's been a while ago since the two Arabic 2.2.1 Froyo versions like S5570JPKA3 and S5570JPKC1 until this update stock ROM is finally revealed.  The firmware build number is S5570JPKQ8 with a default  multi-CSC file of S5570OJPKQ7 for all Arabic Regions and with dated build of  September 16, 2011.




Firmware details:
S5570JPKQ8 - for Arabic region
Version: Android 2.3.4 Gingerbread
BOOT: APBOOT_S5570JPKQ8_CL583440_REV02_user_low_true.tar.md5
PDA: CODE_S5570JPKQ8_CL583440_REV02_user_low_true.tar.md5  
PHONE: MODEM_S5570XWKQ5_CL552983_REV02.tar.md5 
CSC: GT-S5570-MULTI-CSC-OJPKQ7.tar.md5
OPS: TASS_v1.0.ops

To install this ROM you may need to load and then flash all the specific binary files like OPS, BOOT, PDA, PHONE and CSC file on Odin downlowder program. The stock ROM file packaged above comes into multiple files since it's now with a new bootloader of Android 2.3.4 upgrade, the bootloader will replace the old bootloader of your device if it runs from 2.2.1 Froyo versions like S5570JPKA3 and S5570JPKC1.

Note: If you want to upgrade or update your Samsung Galaxy Mini  you may need to back-up all of important data stored on the phone for this stock firmware is a full version  and will wipe and clear all data stored on it.

Android 2.3. 4 Gingerbread S5570JPKQ8 - for Samsung Galaxy Mini S5570 Arabic region via samfirmware link and the password is samfirmware.com

ODIN Multi Downloader v4.38



Quick step on how to install and upgrade Samsung Galaxy Mini to Android 2.3.4 Gingerbread by using firmware S5570JPKQ8 via ODIN.

 Disclaimer: Proceed at your own risk. We are not liable if anything happens to your device by using this method.


1) Download and extract the S5570JPKQ8 file.
2) Run Odin v4.38 on PC's desktop
3) Load the necessary binary files to their specific slots in Odin.
  a. in OPS button load the TASS_v1.0.ops.
  b. in BOOT button load the APBOOT_S5570JPKQ8_CL583440_REV02_user_low_true.tar.md5
  c. in PHONE button load the MODEM_S5570XWKQ5_CL552983_REV02.tar.md5
  d. in PDA button load the CODE_S5570JPKQ8_CL583440_REV02_user_low_true.tar.md5  
  e. in CSC load the GT-S5570-MULTI-CSC-OJPKQ7.tar.md5 

Once all the necessary files already  loaded see that the Auto-reboot and Protect OPS were checked, only the One packaged checkbox remain unchecked.

4) Set the Samsung Galaxy Mini into Download Mode, by turning it off or removing the battery for a while.
 Then press and hold the Volume Down + OK + Power button together. 
 Then connect it to the PC when the download mode screen appears, so that Odin will detect it and it's COM:PORT box will turn to colour yellow and says that the device was  "Added".

5) Then hit the "START" Button  to begin flashing. Just wait around 2-5 minutes until it successfully completes. You will then see a word "PASS" on Odin and the Galaxy Mini will reboot automatically.

6) Once the reboot finishes, un-plug the phone from PC then do a full wipe or factory reset by typing this Code *2767*3855# to get a fully fresh firmware update installed.

How to flash/install I9100XXKI3 Android 2.3.5 Gingerbread on Samsung Galaxy S2 via Odin

Here's the step by step guide on how to update or upgrade the Samsung Galaxy S II to Android 2.3.5 Gingerbread with the firmware build version I9100XXKH3 and multi-CSC OXAKI3. This guide is a manual flashing by way of using Odin multi-downloader tool.

Some changes on the I9100XXKI3 Android 2.3.5 Gingerbread gathered from most users who already flashed it via XDA forum.

- the vibration notification icon is always shown when vibration is enabled. it's smart also, because the user can see than vibration on !
- instead of the apple patented overscrolling, there's now that ugly blue overscrol effect 
- the homescreen cycles now, if you're at your last homescreen you will jump to the first one and vice versa (looks a bit awkward due to the background "reset")
it's NEW blue overscrol effect ! and I love it ! it's much sexy OVERSCROL than we got before
- It's super smooth and responsive, font smoothing is also improved.
- Definitely better than previous releases.
This leaked version is an original (unmodified) Wipe Package from Samsung has:
Download the  I9100XXKI3 stock ROM or via Intratech's packages here:

ODIN Downloader software:
-Odin3 version


A USB data cable for Samsung Galaxy S II

 Procedures in flashing the I9100XXKI3 Android 2.3.5 Gingerbread on Samsung Galaxy S II:

Disclaimer: We shall not held responsible if something happens to your device, Proceed at your own risk.
Note: This is a full wipe version, you may need to back-up all your important data srored on the device for it will all cleared or deleted. This is a leaked version and not a final official firmware version, Anyone who does not prepared flashing with odin can wait for the official Samsung Kies server update which we don't know when to be push out by Samsung.

1) Extract the downloaded file you will the eventually see the files as follows:

CODE_I9100XXKI3_CL577579_REV02_user_low_ship.tar.m d5
GT-I9100-CSC-MULTI-OXAKI3.tar.md5
MODEM_I9100XXKI3_REV_02_CL1062028.ta r.md5

2) Run ODin multidownloder tool on you PC's desktop.
3) On Odin window,  DO NOT CLICK the REPARTITION Checkbox. Only the AUTO REBOOT and RESET TIME remain to be checked.

- Tick on the PDA button then browse to the CODE_I9100XXKI3_CL577579_REV02_user_low_ship.tar.m d5file that you extracted and load it.
- Tick on the Phone button then select and load this file
MODEM_I9100XXKI3_REV_02_CL1062028.ta r.md5
- Tick on the CSC button then select and load this file
GT-I9100-CSC-MULTI-OXAKI3.tar.md5
Odin flashing android 2.3.5 I9100XXKI3 stock ROM

4. Turn OFF the Samsung Galaxy S II, then switch into DOWNLOAD MODE.
 by Pressing and Holding the VolumeDown+OK+Power together. You will then see on the screen that indicates in downloading mode.

Samsung galaxy S II flashing 04
5. Connect the phone to PCB USB cable and wait for the ID:COM box turn yellow to know that the handset is connected to the PC properly. If you still do not get any results, try another USB port on your computer.

6. One all set above, Click "START" button to begin flashing. Do not touch the phone or interrupt while flashing,. Just wait until the flashing process successfully completes, it may takes around 3-5 minutes depends upon the speed of your PC. You will see a word "PASS" once it finishes and the phone will then reboot.

Remove the phone from USB then do a full factory reset to get  a fresh firmware update. You can check the firmware update version of your phone via about phone info.

I9100XXKI3 Android 2.3.5 Gingerbread ROM for Samsung Galaxy S II / S2

The ROM leaks for Samsung Galaxy S2 I9100 has been leaked and released by samfirmware. The said ROM update with a build number of I9100XXKI3 with CSC file I9100OXAKI3 and the build date of September 15 2011. This is the first Android 2.3.5 Gingerbread that leaks for Samsung Galaxy S2, and been reportedly released by samfirmware and darky's team.

Samsung Galaxy S II android 2.3.5 gingerbread update

So, any advance user can now flash the I9100XXKI3 Android 2.3.5 Gingerbread stock ROM and upgrade the Samsung Galaxy S II system firmware by using ODIN downloader tool. We will update this report for any enhancement and improvements, bug fixes etc. regarding this leaked I9100XXKI3 android 2.3.5 update firmware

Firmware Details:
Phone: I9100XXKI3
CSC: I9100OXAKI3
Build version: Android 2.3.5 Gingerbread
Model: Samsung Galaxy S2 I9100
Builddate: 15.09.2011


Download:
http://hotfile.com/dl/130600047/b708...XXKI3.rar.html
Stock KI3 Kernel:
http://www.mediafire.com/file/876pgg...ki3_kernel.tar

via samfirmware.com   password is: samfirmware.com

AT&T (USA) I997UCKI4 Android 2.3.5 Gingerbread ROM leaks for Samsung Infuse 4G SGH-I997

The Android 2.3.5 Gingerbread ROM for Samsung Infuse 4G SGH-I997  AT&T US carrier is now available on stock ROM. This firmware build number is I997UCKI4 with default ATT CSC file and a build date of September 2011. This is the first Android 2.3.5 Gingerbread update that is finally hits only for AT&T Infuse. The ROM was first release by samfirmware along side-by-side with T-Mobile's Samsung Galaxy S 4G SGH-T959v which also got the first 2.3.5 T959VUVKI1 update.


You can grab the stock rom here: I997UCKI4 via samfirmware.com links.
Model = Samsung Infuse 4G SGH-I997
Provider = AT&T USA
K = 2011
I = September
4 = Version

Also check out our updated list for Samsung Infuse 4G stock ROMs for any latest available firmware.

Odin Guide: Install T959VUVKI1 Android 2.3.5 Gingerbread for T- Mobile Samsung Galaxy S 4G

Here's a  step by step guide on how to upgrade the Samsung Galaxy S 4G to Android 2.3.5 Gingerbread T959VUVKI1 firmware update. This guide covers for manual flashing by way of using ODIN since this firmware is a stock ROM, a leaked and not a final Gingerbread version so far. Anyone does not any knowledge about firmware flashing can wait for the T-Mobile official push out via OTA/KIES update.

Disclaimer: Proceed at your own risk, we are not responsible if any problems may happen to your device.

What you'll need:
- Desktop/Laptop Computer Running 32bit Versions Of Either Microsoft Windows 7, Vista, or XP
- Anti-Virus Programs Should Be Disabled- Administrative Privileges Required To Download & Install Software Including Drivers
- An Available USB Port On The PC S That Support 2.0 USB
- Fully Charged Battery
- USB Data Cable

- Back up all important files, SMS,Contacts etc. Use a back up tool like Titanium back up.

Samsung Galaxy S 4G ODIN flashing procedure:
1) Download the Galaxy S 4G T959VUVKI1 Android 2.3.5 Gingerbread Stock ROM and extract it.

2) Run ODIN v1.7 or v1.85 on your desktop.

3) On ODIN click on the PDA button and then select and load the: 
T959VUVKI1-REV00-home-low-CL579207.tar.md5 file in the PDA field.

Ensure that the RE-partition is not checkedOnly the Auto Reboot and F. Reset Time are checked on each checkboxes.
DO NOT USE a pit file. Leave it empty.

Odin Install T959VUVKI1 Android 2.3.5 Gingerbread Update for T- Mobile Samsung Galaxy S 4G

4) Turn your Galaxy S 4G off. Press and hold the VOLUME DOWN and POWER Button
- then plug the USB to your PC. This will reboot the phone into Download Mode. You should see a BIG yellow triangle on the phone said Download mode, and the ID:COM box on ODIN will indicate that the phone is already connected or detected.

5) Once all set, hit the "Start" to begin the firmware flashing.


Wait.... until the firmware flashing process finishes. You will then see a word "PASS" when it completes and then the phone will then reboot. It only takes around 2-5 minutes max depends on your PC speed. Once finish, unplug your device from PC. That's it!

T- Mobile (USA) Samsung Galaxy S 4G T959VUVKI1 Android 2.3.5 Gingerbread Update

The first Android 2.3.5 Gingerbread for Galaxy S 4G updates finally  here, the firmware build number is T959VUVKI1 with a default CSC file of TMB and build date September 15, 2011. Folks using a carrier branded T-Mobile Galaxy S 4G SGH-T959V that runs on Android version 2.3.3 or 2.3.4 T959VUVKF1, T959VUVKG4 and T959VUVKH2 can now upgrade to T959VUVKI1 which is now packed on Android 2.3.5. Other fixes and improvements- This update version will improved network performance for the Galaxy S 4G, fixed bluetooth bug, improved Gmail application .



Build info.
  # autogenerated by buildinfo.sh
    ro.build.id=GINGERBREAD
    ro.build.display.id=GINGERBREAD.VUVKI1
    ro.build.version.incremental=VUVKI1
    ro.build.version.sdk=10
    ro.build.version.codename=REL
    ro.build.version.release=2.3.5
    ro.build.date=Thu Sep 15 18:20:37 KST 2011
    ro.build.date.utc=1316078437
    ro.build.type=user
    ro.build.user=se.infra
    ro.build.host=SEP-77
    ro.build.tags=release-keys
    ro.product.model=SGH-T959V
    ro.product.brand=samsung
    ro.product.name=SGH-T959V
    ro.product.device=SGH-T959V
    ro.product.board=SGH-T959V
    ro.product.cpu.abi=armeabi-v7a
    ro.product.cpu.abi2=armeabi
    ro.product.manufacturer=samsung
    ro.product.locale.language=en
    ro.product.locale.region=US
    ro.wifi.channels=
    ro.board.platform=s5pc110
    # ro.build.product is obsolete; use ro.product.device
    ro.build.product=SGH-T959V
    # Do not try to parse ro.build.description or .fingerprint
    ro.build.description=SGH-T959V-user 2.3.5 GINGERBREAD VUVKI1 release-keys
    ro.build.fingerprint=samsung/SGH-T959V/SGH-T959V:2.3.5/GINGERBREAD/VUVKI1:user/release-keys
    # Samsung Specific Properties
    ro.build.PDA=T959VUVKI1
    ro.build.hidden_ver=T959VUVKI1
    ro.build.changelist=579207
    ro.flash.resolution=1080
    # end build properties

This firmware was released by samfirmware.
Download the original stock ROM : T959VUVKI1 
Device: SGH-T959V Samsung Galaxy S 4G
Carrier: T-Mobile (USA)
Version: Android 2.3.5 Gingerbread

How to update Samsung Galaxy S 4G using the T959VUVKI1 via Odin.
This is for advance users only, everyone can still upgrade for the official OTA update release.

1) Download the stock ROM  .tar file.
2) Extract  the .tar file you just downloaded, the password is samfirmware.com. It will become .tar.md5 file extension then.
3) Start Odin downloader
4) Click "PDA" and load the .tar.md5 file you just extracted into it.

DO NOT SET ANY OPTIONS IN ODIN

5) Turn off the Galaxy S 4G then set the device into download mode - Hold Vol+Up & Vol+Down button,  then plug it in to the PC and Odin will recognize it.
6) Once detected in Odin, hit Start and wait for your phone to flash, reboot, and load to a lockscreen
7)  Turn your phone off and disconnect it from USB.

Perform factory reset  to get rid of  bootloops or auto-reboots.

P7310ZSKH4 Android 3.1 Honeycomb Samsung Galaxy Tab 8.9'' WIFI Asia ROM

Here's the first original stock ROM on the list for Samsung Galaxy Tab 8.9" WIFI GT-P7310. This firmware build number is P7310ZSKH4 with CSC-BRI Taiwan file which pulled from Asian version of Tab 8.9 Wifi only. This is Android 3.1 Honeycomb which the Embedded-Operating System since its release.
Samfirmware announced the first stock ROM release that has been pulled from Samsung Galaxy Tab 8.9" WIFI GT-P7310.

Note: This is for Galaxy Tab GT-P7310 8.9" Wifi Asian version only. Do not ever try to flash this in other Galaxy Tab varieties, for it might end up bricking the device. See the Galaxy Tab GT-P7310 8.9" Wifi specs details below or check the about phone info of your Tab before using this stock ROM.

Samsung Galaxy Tab 8.9
Software-Environment
Embedded-Operating;System: Google Android 3.1
Browse devices running this OS
Microprocessor,;Chipset
CPU;Clock: 1000 MHz
CPU: NVIDIA Tegra 2 250 T20
Browse devices based on this microprocessor
Memory,_Storage:capacity
RAM;capacity: 1 GiB
ROM_capacity: 15.2 GiB
Display-Type: color transflective TFT , 16777216 scales
Display;Diagonal: 8.9 "
Display-Resolution: 1280 x 800
Video;out: 1280x720 (720p) resolution
Sound
Microphone(s): mono
Loudspeaker(s): stereo
Audio;Output: 3.5mm
Control_Peripherals
Positioning+Device: Multi-touch screen
Primary+Keyboard: Not supported
Directional+Pad: Not supported
Scroll_Wheel: Not supported
Interfaces
Expansion:Slots: microSD, microSDHC, TransFlash
USB: USB 2.0 client, 480Mbit/s
micro-USB
Bluetooth: Bluetooth 2.0 + EDR
Wireless_LAN: 802.11a, 802.11b, 802.11g, 802.11n
Infrared:Gate: Not supported
Multimedia_Telecommunication
Analog;Radio;Receiver: Not supported
Digital_Media:Broadcast+Tuner: Not supported
Satellite+Navigation
Built-in-GPS+module: Supported
Complementary;GPS+Services: Assisted GPS, Geotagging
Built-in;Digital_Camera
Main:Camera: 3.1 MP
Autofocus+(AF): Supported
Optical+Zoom: 1 x
Macro-Mode: Supported
Built-in-Flash: mobile light (LED)
Secondary;Camera: 1.9 MP
Additional+Details
Built-in+accelerometer: Supported
Battery: removable
Battery-Capacity: 6000 mAh
You can grab the P7310ZSKH4  via samfirmware.com in the Samsung Galaxy Tab 8.9'' WiFi P7310 Android Firmware page.

Firmware I9100XWKI4 CSC= I9100TENKI1 Norway (Telenor) Samsung Galaxy S2 Android 2.3.4 Gingerbread Update

The Android 2.3.4 Gingerbread firmware update for Samsung Galaxy S2 Norway (Telenor) has also been released. This has the same build number of 9100XWKI4 that has been previously first released in Nordic Countries. This firmware has its default CSC file which is TEN and now come along with a code I9100TENKI1 and dated build as of September 17, 2011. From most recent feedbacks of this latest released are some improvements and bug fixes of wifi issues from previous I9100XXKH3 version.

Firmware details:

Norway (Telenor) I9100XWKI4/I9100TENKI1
Version: Android 2.3.4 Gingerbread 
Release Date: September 20, 2011


Build:
ro.build.id = GINGERBREAD
ro.build.display.id = GINGERBREAD.XWKI4
ro.build.version.incremental = XWKI4
ro.build.version.sdk = 10
ro.build.version.codename = REL
ro.build.version.release = 2.3.4
ro.build.date = Wed Sep 14 20:34:11 KST 2011
ro.build.date.utc = 1316000051
ro.build.type = user
ro.build.user = root
ro.build.host = DELL143
ro.build.tags = release-keys
ro.product.model = GT-i9100
ro.product.brand = samsung
ro.product.name = GT-i9100
ro.product.device = GT-i9100
ro.product.board = GT-i9100
ro.product.cpu.abi = armeabi-V7A
Samsung # Specific Properties
ro.build.PDA = I9100XWKI4
ro.build.hidden_ver = I9100XWKI4
ro.build.changelist = 575 468
ro.product.cpu.abi2 = armeabi
ro.product.manufacturer = samsung
ro.product.locale.language = en
ro.product.locale.region = GB
ro.wifi.channels =
ro.board.platform = s5pc210
# Ro.build.product is obsolete; use ro.product.device
ro.build.product = GT-i9100
# Do not try to parse or ro.build.description. FingerPrint
ro.build.description = GT-i9100-user 2.3.4 GINGERBREAD XWKI4 release keys
ro.build.fingerprint = samsung/GT-I9100/GT-I9100: 2.3.4/GINGERBREAD/XWKI4: user / release keys
Samsung # Specific Properties
ro.build.PDA = I9100XWKI4
ro.build.hidden_ver = I9100XWKI4
ro.build.changelist = 575 468
ro.tether.denied = false
ro.flash.resolution = 1080
# End build properties

So just try it out. This firmware is rolled out from Kies Server but if you prepare Odin downloader tool, you can grab the Stock ROM file below via samfirmware link.
Download: Norway (Telenor) 9100XWKI4_I9100OXXKI2_I9100XXKI1.rar
password: samfirmware.com

Samsung Galaxy S2 I9100XWKI4/I9100ATOKI1 [ATO Austria] Firmware Update Released

The Android 2.3.4 Gingerbread with build number I9100XWKI4 hits also in Austria this time it has a CSC file I9100ATOKI1 which is built for Austrian version of  Samsung Galaxy S2. The build date is September 17, 2011. This is also same of rolling the Android 2.3.3 Official updates over Europe Nordic countries.

There are also an official release for Czech, Lithuania and Norway that is same as XWKI4 but gets the specific CSC file for each region.


Samsung Galaxy S2 ATO- Austria I9100XWKI4
Product Code: GT-I9100LKAATO
HIDSVER: I9100XWKI4/I9100ATOKI1/I9100XXKI1/I9100XWKI4
Build Date: September 17, 2011
Version Android 2.3.4 Gingerbread

This firmware has been reportedly finally fixes the Wifi  issue from previous Samsung Galaxy S2 firmware update. So, just try it out and flash it at your own risk, you can grab the Stock ROM from the link below, and just send some feedbacks about this new firmware releases.

Download link of the Original Stock ROM from Intratech link.
Austrian (ATO) version: http://www.multiupload.com/6R69F500FQ
 Password: Intratech@XDA

I9100XWKI4 Android 2.3.4 Samsung Galaxy S2 Official Release Stock ROM download

Samsung released  the official Android 2.3.4 Gingerbread for Samsung Galaxy S II over Europe 'Nordic countries'. This version with a build number of I9100XWKI4, and is packed in 2.3.4 Gingerbread with a build date of September 15, 2011.
Some improvements are way better from XXKH3 on this XWKI4 version , the new system font in this firmware is a little bit look different from XXKH3 because its more bolder and bigger but the most interesting so far, the wifi signal is  finally fixed. This release hits over Czech, Lithuania, Austria and Norway.
I9100XWKI4 Android 2.3.4 Samsung Galaxy S2



NEE = Nordic Countries:
Product Code: GT-I9100LKANEE
HIDSVER: I9100XWKI4/I9100OXXKI2/I9100XXKI1/I9100XWKI4
Modified: 09/15/2011 18:53:36
Model: i9100
Region: France, United Kingdom, Italy, Netherlands, Portugal, Spain, Turkey, UK, (Branded: no)
Available languages: de, en, es, fr, it, pt, tr, (pl)
Android: 2.3.4 Gingerbread

OXX MultiCSC (AUT, COS, CYO, DNF, EUR, NEE, ODK, ORG, ORS, PAN, SEB, SUN, TDC, TMS, TPH, TRG, VDH, BY, XEE, XEH, XEO, xeZ, XSK)

Build info:

ro.build.id = GINGERBREAD
ro.build.display.id = GINGERBREAD.XWKI4
ro.build.version.incremental = XWKI4
ro.build.version.sdk = 10
ro.build.version.codename = REL
ro.build.version.release = 2.3.4
ro.build.date = Wed Sep 14 20:34:11 KST 2011
ro.build.date.utc = 1316000051
ro.build.type = user
ro.build.user = root
ro.build.host = DELL143
ro.build.tags = release-keys
ro.product.model = GT-i9100
ro.product.brand = samsung
ro.product.name = GT-i9100
ro.product.device = GT-i9100
ro.product.board = GT-i9100
ro.product.cpu.abi = armeabi-V7A
Samsung # Specific Properties
ro.build.PDA = I9100XWKI4
ro.build.hidden_ver = I9100XWKI4
ro.build.changelist = 575 468
ro.product.cpu.abi2 = armeabi
ro.product.manufacturer = samsung
ro.product.locale.language = en
ro.product.locale.region = GB
ro.wifi.channels =
ro.board.platform = s5pc210
# Ro.build.product is obsolete; use ro.product.device
ro.build.product = GT-i9100
# Do not try to parse or ro.build.description. FingerPrint
ro.build.description = GT-i9100-user 2.3.4 GINGERBREAD XWKI4 release keys
ro.build.fingerprint = samsung/GT-I9100/GT-I9100: 2.3.4/GINGERBREAD/XWKI4: user / release keys
Samsung # Specific Properties
ro.build.PDA = I9100XWKI4
ro.build.hidden_ver = I9100XWKI4
ro.build.changelist = 575 468
ro.tether.denied = false
ro.flash.resolution = 1080
# End build properties
#
# System.prop for asop5000
#

rild.libpath = / system / lib / libsec-ril.so
rild.libargs =- d / dev/ttyS0
ro.sf.lcd_density = 240
dalvik.vm.heapsize = 64m

# Samsung USB default mode
persist.service.usb.setting = 0
dev.powersave_fps = 0

#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.url.legal http://www.google.com/intl/ =% s / mobile / android / basic / phone-legal.html
ro.url.legal.android_privacy http://www.google.com/intl/ =% s / mobile / android / basic / privacy.html
ro.com.google.locationfeatures = 1
ro.com.google.clientidbase = android-samsung
ro.com.google.gmsversion = 2.3_r6
media.stagefright.enable-player = false
media.stagefright.enable meta = false
media.stagefright.enable-scan = false
media.stagefright.enable-http = true
media.stagefright.enable-rtsp = false
dev.sfbootcomplete = 0
ro.com.google.clientidbase = android-samsung
ro.url.legal http://www.google.com/intl/ =% s / mobile / android / basic / phone-legal.html
ro.url.legal.android_privacy http://www.google.com/intl/ =% s / mobile / android / basic / privacy.html
ro.com.google.locationfeatures = 1
keyguard.no_require_sim = true
ro.config.ringtone = S_Over_the_horizon.ogg
ro.config.notification_sound = 01_Sherbet.ogg
ro.config.alarm_alert = Good_Morning.ogg
ro.config.media_sound = Media_preview_Touch_the_ligh t.ogg
ro.opengles.version = 131072
ro.secdevenc = true
ro.wtldatapassword = true
net.bt.name = Android
dalvik.vm.stack-trace-file = / data / anr / traces.txt

Intratech has therefore made a repackage of the XWKI4 firmware. Repackaged to remove the boot loader that blocks resetting the binary counter with a jig when you flash on unsigned kernel because other having trouble of resetting the reset counter after flashing using Odin.

http://www.multiupload.com/BICMMUFFWF 
XWKI4 Stock Kernel: http://www.multiupload.com/ORHRRNA60I
Password: Intratech@XDA

I've attached the old bootloader repackaged in a tarball for Odin. Anyone who's flashed the full firmware package and cannot reset their binary counter flash this with Odin and then try the Jig. Place tarball in the PDA section of Odin
Multiupload link: http://www.multiupload.com/LQQBRQVJUD

Join the discussion thread here to get more details:
http://forum.xda-developers.com/showthread.php?t=1269607

Nexus S 4G Android 2.3.7 Update GWK74 Original OTA Firmware and Rooted Odexed/Deodexed Stock ROM

The Android 2.3.7 Gingerbread OTA (Over The Air) firmware update already rolls out for Sprint SPH-d720 Google Nexus S 4G. This firmware build version is GWK74, and anyone who runs from GRJ90 can now upgrade to GWK74 and receive a notification message stating that an update is already available via on OTA. This firmware update will pushed out to everyone but we're aren't sure of how long does it takes.
Sprint Nexus S 4G GWK74 android 2.3.7 firmware update

The said update brings along with a Google Wallet feature and a Google Security Fix, see details here.
Some users who already got the GWK74 update already gets a nice surprise of  $10 credit on Google Wallet. So, for anyone does not have receive the notification may need a little bit patience and wait. Others already got a manual upgrade using the original GWK74 stock ROM that has been pulled from the said update from Sprint.

Here is the direct download to the zip file for the update to GWK74 Android 2.3.7, this can be applied if the current software version of your Nexus S 4G is GRJ90.
http://android.clients.google.com/pa...0.2e8d4014.zip

How to apply the GWK74 Android 2.3.7 update? Watch this video.
http://www.youtube.com/watch?v=X3RiIirybXM

How to root this firmware version? BuglessPete already pack the GWK74 Stock Rooted ROM the Odexed and DeOdexed version.

[Arabic Stock ROM] Samsung Galaxy S II I9100JPKI1 Android 2.3.4 Gingerbread

Another Android 2.3.4 Gingerbread firmware Samsung Galaxy S2 is available on stock via samfimware. This firmware version is an Arabic 2.3.4 Gingerbread with build number I9100JPKI1 with CSC file OJPKI1 and build date as of September 2011. The said I9100JPKI1 stock ROM was pulled from official Samsung Kies server from Egypt a few days ago.

We also heard some humors that the Samsung Galaxy S2 Android 2.3.5 Gingerbread update is  already in the hands of some Samsung devs and already run some tests. The said firmware with just a humored build number of I9100XXKI1 and or I9100XXKI1 which is firstly hits in European countries and reportedly needs a lot of improvements for it was a little bit buggy so far. So far, we do not know yet for when the 2.3.5 gingerbread for Galaxy S2 gonna release for according to some devs that Samsung  are now protecting for their unofficial firmware to leak. But samfirmware made a tweets that they will manage to released the said 2.3.5 for Galaxy S2 later this month.



Another 2.3.4 Gingerbread also has also been release from Asia, this build number is I9100ZHKI2 with a Chinese default language. It seems like the global release for android 2.3.4 which finally almost complete, everyone now might also been waiting for the 2.3.5 Gingerbread version.

ODIN Guide: How to Install and Upgrade Samsung Galaxy Gio S5660 to Android 2.3.4 Gingerbread XXKQG Firmware Update

 This is the step by step procedure on how to manually upgrade or update the Samsung Galaxy Gio S5660 to the latest Android 2.3.4 firmware build S5660XXKQG with a default Lithuanian (Baltic language), since this is a Samsung Kies server official release over Lithuania, way back a few days ago from the time of this post. Although this firmware is for Lithuania this is also covers for Europe Galaxy Gio version for which it has also includes most European languages packed on it.

As of now there are two other 2.3.4 Gingerbread build for Galaxy Gio, the S5660XXKQB and S5660XXKQ6. You may check out all the previous and latest Stock ROM's available now on Samsung Galaxy Gio firmware updates list.

Samsung Galaxy Gio S5660 Android 2.3.4 Gingerbread Firmware flashing Via ODIN Procedure:
"Disclaimer: We Shall not be liable for any damage that results to your phone! Everything you do is at your own risk, Please proceed with extra precautions!

Samsung Galaxy Gio Stock ROM S5660XXKQG Firmware.

CSC File: CSC - SEBKQ1
PDA: PDA S5660XXKQG
OPS File: GIO_v1.0.ops
Android Version: 2.3.4 Gingerbread
Build Date: September 07, 2011
Download link from samfirmware.com
Password: samfirmware.com

OPS File: GIO_v1.0.ops Download
ODIN v4.42 Downloader Program:
Download

Okay, this firmware comes in single file .TAR packaged , so there 's no need to find the BOOT, PHONE, PDA and CSC file, all we need is the OPS file and were' ready to flash. Juts make a back up copy of all important files stored from the phone, although this is a one packaged , there is no wipe may occur but it is best to have an extra precautions to avoid any issues that may possibly happen.


1) Extract the downloaded firmware S5660XXKQG_S5660SEBKQ1_S5660XXKQ5
Android 2.3.4 Gingerbread XXKQG Firmware flashing for Samsung Galaxy Gio
Note: the DLL files included from the downloaded files is not for use in this process.

2) Run ODIN v4.42 on your computer's desktop.

odin guide samsung galaxy Gio android 2.3.4 gingerbread
3) Click the OPS button then select and load the GIO_v1.0.ops file.
    Tick on One Packaged checkbox, then click the One Packaged button and then load:
    S5660XXKQG_S5660SEBKQ1_S5660XXKQ5_HOME.tar.md5

4) Then reboot the Samsung Galaxy Mini  it into Download mode,. Turn it OFF the by pressing ( Volume Down + OK + Power ) you will then see the phone in downloading screen.

 samsung galaxy gio download mode 3-button combination
5) After that,  Connect  the phone to PC when the phone displays the downloading icon.,  The COM port mapping will turn to yellow colour when the device is properly connected and detected.

6) Then fire up the "START" button to begin flashing.  Don't touch anything until the whole process successfully completes. It takes just around 2-5 minutes just depends to your computer speed.

A word "PASS" will display on Odin once it finishes.
If the flashing  successfully completes, the phone will then reboot... you may then unplug it from your  computer.You can confirm the newly downloaded firmware version name etc by typing **#1234#.
Then do a full reset by typing this Code *2767*3855# to get a fully fresh firmware update installed. Then change the language settings at your own region. Just send us some feedbacks for any  issues that may possibly occur while upgrading.

How to Update/Upgrade Samsung Galaxy Mini S5570 to Android 2.3.4 Gingerbread S5570ZSKPB Asia Firmware

Here's another step by step guide on how to manually flash and install the Asian Firmware S5570ZSKPB with default language as Chinese on Samsung Galaxy Mini GT-S5570 that will finally update or upgrade to Android 2.3.4 Gingerbread version. This method is by way of flashing the Stock ROM using Odin instead of Kies software downloader.

The firmware build S5570ZSKPB with S5570XXKPL CSC file is an Official Samsung Kies firmware updates for Asian versions of Galaxy Fit. This firmware comes in a single file packages so it will only need to have a copy of the OPS file and then the single .TAR.md5 file. Flashing a  single file packages will not wipe all data stored on your Galaxy fit it's just like installing it using Kies, but just make back up all of important files as an extra precautionary measures since we are flashing firmware here.

S5570ZSKPB 
CSC: S5570OZSKPB
OPS: TASS.OPS
Version: Android 2.3.4 Gingerbread
Released: August 20, 2011
Download
password: samfirmware.com

the OPS file: TASS.OPS
and ODIN downloader program

You can check out the list of all the latest firmware updates of Samsung Galaxy mini here.

1) Extract or unzip/unrar the downloaded firmware. S5570ZSKPB_S5570OZSKPB_S5570XXKPL

2) Run Odin multi-downloader v4.38 tool.

samsung galaxy mini odin downloader program


3)   - Click on the OPS button then select and load the TASS.OPS file.
      - Check the ONE PACKAGE checkbox. Ensure that the Auto Reboot and Protect OPS are also
checked.
- Click on the One Packaged button then select and load the firmware packaged.
S5570ZSKPB_S5570OZSKPB_S5570XXKPL_HOME.tar.md5
Samsung Galaxy Fit  S5570 to Android 2.3.4 Gingerbread S5570ZSKPB Asia
4) Re-boot the Samsung Galaxy Mini into Download Mode: Turn it Off  then Press and hold the ( Volume Down + OK + Power )

Samsung Galaxy Mini S5570 Download mode picture

5)  Connect the phone to PC, after you see that the device is already set in downloading mode.
    The COM:PORT mapping will show you a yellow indication if the device is already detected
- then hit the "START" button to begin flashing the firmware.

ODIn galaxy mini android 2.3.4 gingerbread XXKPJ
6) Wait for a while and do not touch anything until the program will finish the downloading process. It just takes around a 2-5 minutes to complete depending on your computer speed. A word "PASS" will display on the left side square if the flashing successfully completes.

Once it finishes, the phone will then reboot, you may then remove it from the computer.
You can also confirm the newly installed firmware version name etc by typing *#1234# or through About Phone Info Settings. Then do a full reset by typing this Code *2767*3855# to get a fully fresh firmware update installed.

[Stock ROM] Samsung Galaxy S II I9100JPKI1 Arabic and I9100ZHKI2 Chinese Android 2.3.4 Gingerbread

Another Android 2.3.4 Gingerbread firmware Samsung Galaxy S2 is available on stock via samfimware. This firmware version is an Arabic 2.3.4 Gingerbread with build number I9100JPKI1 with CSC file OJPKI1 and build date as of September 2011. The said I9100JPKI1 stock ROM was pulled from official Samsung Kies server from Egypt a few days ago.

We also heard some humors that the Samsung Galaxy S2 Android 2.3.5 Gingerbread update is  already in the hands of some Samsung devs and already run some tests. The said firmware with a humored build number of I9100XXKI1 and or I9100XXKI2 which is build for European countries and reportedly needs a lot of improvements for it was a little bit buggy so far. We do not know yet for when it's gonna release for according to some devs that Samsung  is now protecting for their unofficial firmware. But samfirmware made a tweets that they are going to manage and release the said  2.3.5 gingerbread for Galaxy S2 leak within this month.

Samsung Galaxy S2 android 2.3.5 gingerbread firmware update

Well, let's abide for that a little while later we will get the update soon, for the Galaxy S I9000 2.3.5 has already been released a  few days ago.
Aside from I9100JPKI1, there's another 2.3.4 Gingerbread  been release for Asia, the build number is I9100ZHKI2 with a Chinese default language. It seems like the global release for android 2.3.4 which finally almost complete, everyone now might also been waiting for the 2.3.5 Gingerbread version.

Here's the link for the Galaxy S II Android 2.3.4 Gingerbread I9100JPKI1 Arabic and I9100XHKI2 Chinese firmware version via samfirmware and the password is samfirmware.com.

So' that's it for now we will keep you in touch if there's any latest firmware updates available for your precious Galaxy S2.

[ODIN Guide] How to Update/Upgrade Samsung Galaxy Ace S5830 to Android 2.3.3 Gingerbread XXKPT Firmware

Here's the step by step procedure on how to manually install the firmware build S5830XWKPT to Samsung Galaxy Ace S5830, which will update the phone to android 2.3.3 Gingerbread version. The S5830XWKPT build firmware has a CSC file of XEOKP2  a Polski default language which is for Poland but you can manually change it according to your desire language or in your region.

Firmware details:
PDA: S5830XWKPT
Phone: S5830XWKP7
CSC: S5830PLSKP2
Android 2.3.3 Gingerbread
Update release: August 2011

Here's an available languages for this firmware:
- Čeština
- Dansk
- Deutsch (Deutschland)
- Deutsch (Österreich)
- Deutsch (Schweiz)
- English (Australia)
- English (Ireland)
- English (New Zeland)
- English (Sout Africa)
- English (United Kingdom)
- English (United States)
- Español (España)
- Español (Estados Unidos)
- Français (France)
- Hrvatski
- Icelandic
- Irish
- Italiano
- Kazakh
- Latviešu
- Lietuvių
- Macedonian
- Magyar
- Nederlands (België)
- Norwegian
- Polski
- Português
- Română
- Slovenčina
- Slovenščina
- Suomi
- Svrnska
- Türkçe
- Ελληνικά
- Български
- Русский
- српски
- YKPAÏHCBK
- 한국어
Note: this may contain error!
See the build info here:

The S5830XWKPT is pack in a multiple packaged file, which means you need to flash the OPS, Bootloader, PHONE, PDA and CSC together in ODIN. When it comes to flashing the 5 binary files, it will delete all your data stored on the device,. Make sure to have a back copy of all important data stored on your Galaxy Ace before proceeding.. Just find and use any back up tools you got, aside from ROM manager which is reportedly may harm your precious Galaxy Ace. So, proceed with extra precaution.

Odin Flashing procedure on Samsung Galaxy Ace with S5830XWKPT firmware.

Disclaimer: We shall not be held responsible if anything happens to your device. You may only proceed at your risk. This guide will work and proven by us and other users.

Download the firmware package, OPS file and Odin Multi downloader tool.
Download via samfimware.com link
password is samfirmware.com

OPS File: COOPER.OPS
ODIN Multi Downloader v4.38

1) Once the firmware already downloaded extract it.
samsung galaxy Ace gt-s5830 XWKPT download firmware update



2) Extract and then Run ODIN on your PC desktop.
3) Tick on the OPS button then select and load the COOPER.Ops file.

- Tick on the  BOOT button then select and load the bootloader file
APBOOT_S5830XWKPT_CL469288_REV03_user_low_true.tar.md5

- Tick on the PDA button then load and select the code file
CODE_S5830XWKPT_CL469288_REV03_user_low_true.tar.md5

- Tick on the PHONE button then select and load the phone's modem
 MODEM_S5830XWKP7_CL407346_REV03.tar.md5

  - Tick on the CSC button then load and select the default CSC file
GT-S5830-csc-XEOKP2.tar.md5 

  On the checkboxes, leave the Auto-Reboot and Protect OPS checked only the One Package is unchecked


samsung galaxy Ace gt-s5830 firmware update flashing procedure installing files


4) Once all the binary files are already set and loaded on ODIN.. It's now time to prepare your Galaxy Ace into download mode so that it can be detected by ODIN.
To boot  into download mode, Turn Off your Samsung Galaxy Ace,  then press and hold the Volume Down+Power+ Middle buttons together. You will then see an android robot digging with a shovel on the LCD screen display.

samsung galaxy Ace Download mode

5) Once the phone displays in download mode, plug the USB cable to connect it to PC, on ODIN a COM Port mapping will indicate and turn to color yellow if the device is already detected. Ensure that the connection is very tough and then put your device in a safe place of your computer table to avoid any interruption.
samsung galaxy Ace gt-s5830 firmware update flashing procedure start guide

6) After making sure that the phone is properly connected,.. Hit the "START" button to begin flashing. Wait until the whole process completes it only takes around 5 minutes to finish. A progress bar on the left side of ODIN will show you the downloading progress.
A word "PASS" on ODIN will show and indicates that the flashing is already completed. . Then your Samsung Galaxy Ace will then reboot.
samsung galaxy Ace gt-s5830 firmware update flashing procedure completes



If the flashing  successfully completes, the phone will then reboot... you may then unplug it from the PC.
You can confirm the newly downloaded firmware version name etc by typing **#1234#.

Do a factory reset to regain a fresh firmware installed after flashing,  a full reset is by typing this Code *2767*3855# . Just make a back up copy first for it will wipe the data this time. Factory reset may help to gain a fresh firmware installed after installing.
You may then change the default language according to your locale or region, On the Menu managed to navigate and locate the icon for Text and Locale settings and then change it to your prepared language.

Firmware Update S5830XWKPT Android 2.3.3 Gingerbread for Samsung Galaxy Ace GT-S5830 Arrive!

Another Android 2.3.3 Gingerbread update firmware hits for Samsung Galaxy Ace S5830. The new release with build number S5830XWKPT, which has CSC_XEOKP2 for Poland "Poľsko". The best thing about this  is that you can also update your Samsung Galaxy Ace from any part of the globe. You may only download the firmware file below from samfirmware and flash it using ODIN. 
According to some users feedbacks, that this firmware is one of the most stable release of Gingerbread versions like from previous versions S5830XWKPN and  S5830XWKPO, which commonly solved SOD issues.


Firmware details:
PDA: S5830XWKPT
Phone: S5830XWKP7
CSC: S5830PLSKP2
Android 2.3.3 Gingerbread
Update release: August 2011
Download via samfimware.com link
password is samfirmware.com

Samsung galaxy update 2.3.3 gingerbread XWKPT info
Build info:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=GINGERBREAD
ro.build.display.id=GINGERBREAD.XWKPT
ro.build.version.incremental=XWKPT
ro.build.version.sdk=10
ro.build.version.codename=REL
ro.build.version.release=2.3.3
ro.build.date=Wed Aug 10 19:42:17 KST 2011
ro.build.date.utc=1312972937
ro.build.type=user
ro.build.user=root
ro.build.host=DELL148
ro.build.tags=release-keys
ro.product.model=GT-S5830
ro.product.brand=samsung
ro.product.name=GT-S5830
ro.product.device=GT-S5830
ro.product.board=GT-S5830
ro.product.cpu.abi=armeabi
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=GB
ro.wifi.channels=
ro.board.platform=msm7k
# ro.build.product is obsolete; use ro.product.device
ro.build.product=GT-S5830
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=GT-S5830-user 2.3.3 GINGERBREAD XWKPT release-keys
ro.build.fingerprint=samsung/GT-S5830/GT-S5830:2.3.3/GINGERBREAD/XWKPT:user/release-keys
# Samsung Specific Properties
ro.build.PDA=S5830XWKPT
ro.build.hidden_ver=S5830XWKPT
ro.build.changelist=469288
ro.build.buildtag=
# end build properties
There are also other two 2.3.3 firmware added for Poland service providers which has different CSC file as a Provider Official Firmware.
PDA: S5830XWKPT
Phone: S5830XWKP7
CSC: S5830PLSKP2
Download

PDA: S5830XWKPU
Phone: S5830XWKP7
CSC: S5830TPLKP2
Download:

 The S5830XWKPT comes in a multiple packaged file, which means you need to flash  the OPS, PHONE, Bootloader, PDA and CSC together in ODIN. See the Odin manual installation and flashing procedure here on Samsung Galaxy Ace

CyanogenMod 7 builds for EVO 3D and HTC Sensation now online!

Now, if you have a 3.4 inch HTC Sensation and EVO 3D this is your chance to have a sneak peak of the Alphafied CM7. Last night when Keyan Mobli shout out in our Google+ stream page that the unofficial builds of CyanogenMod 7 for HTC Sensation and Evo 3D are now available. Many Evo 3D advance users hurried up flashing the builds without any hesitation . I didn't managed to deal with it yet for I was in creating the Samsung Galaxy S 2.3.5 guides. The stream page was then suddenly flooded with a lot of  feedbacks from those most fastest flashers.
CyanogenMod 7 builds for EVO 3D and HTC Sensation
According what I gathered up in some reports earlier, this build is much prettier stable. Anyway, it's still easy to install this builds as just like - First time flashing CM 7 to your Sensation (or coming from another ROM)?
1. Unlock/root your device and install Clockwork Recovery via ROM Manager
2. Do a Nandroid backup!
3. WIPE
4. Install the ROM
5. Optionally install the Google Addon

So if you want to give it a try, grab it out! HTC Sensation; HTC EVO 3D; via +Keyan Mobli

How to Update/Upgrade Samsung Galaxy S I9000 to Android 2.3.5 Gingerbread I9000XXJVS Firmware via ODIN

This step by step guide will show you how to manually flash the Android 2.3.5 Gingerbread firmware on Samsung Galaxy S I9000 that just has leaked with build number I9000XXJVS from samfirmware.
This is a direct and brief method flashing procedure using ODIN downloader tool.

Note: This ROM is for International version of Samsung Galaxy S with model code GT-I9000. Don't attempt to flash it with other variants other than GT-I9000, you may check your device version by navigating to about phone settings info first. This is a leaked version and  some functionality issues may present and other enhancement and performance will also improved.

This guide are for advance users only, who already have once experience in flashing ROMs with Odin. Beginners can relate too, for the guides below is added with detailed stuff to make it a lot easier to follow., but we did not encourage you to do so..  Just proceed with extra precautions.

ODIN Flashing procedure Android 2.3.5 Gingerbread XXJVS on Samsung Galaxy S I9000

Do and prepare the following:
- Just make a back up of all your important data, contacts, messages, applications installed or stored on the phone.
- use a PC that runs on windows XP or later OS.  Close any programs such anti-virus etc.
- remove the SD card and SIM card to avoid issues.
- make sure that the phones battery is fully charge or at least around 40-50%.
- USB cable to PC

1) Download the firmware then extract it in one folder.
Samsung Galaxy S I9000
Build Number:I9000XXJVS
Version: Android 2.3.5 Gingerbread
Regions: for Europe and International Galaxy S version see the languages available here.
Download
Password: samfirmware.com

Galaxy S I9000 Android 2.3.5 Gingerbread I9000XXJVS Firmware download

2) Prepare ODIN Downloader Tool v1.7 Download this version. Extract it and then run on your PC desktop.

3) Turn your Samsung Galaxy S off., Then boot into download mode by pressing and holding Volume Down+Home+Power buttons at the same time.You will eventually see a picture like the one below with black Android robot digging within a  triangle.


Samsung galaxy S download mode buttons
4) Connect your Galaxy S with your computer, the ID:COM box will turn to a yellow colour and a message "added" in the box is an indication that the phone is connected to the PC properly. If you still do not get any results, try another USB port on your computer. Now if you already ensure that the phone is detected by ODin proceed to step 5.

5) On ODIN click the PIT button then load the 1_odin_20100512.pit file.
    Ensure to check the RE_ PARTITION, AUTO-REBOOT and F.RESET TIME checkboxes option.

6) Now load the necessary binary files PDA, PHONE and CSC.
    Click the PDA button then select and load:
    CODE_I9000XXJVS_CL565837_REV03_user_low_ship.tar

    Click the PHONE button then select and load:
    MODEM_I9000XXJVS_REV_00_CL1059471.tar

   Click the CSC button then select and load:
   GT-I9000-CSC-MULTI-OXAJVS.tar

see the image below it should be shown like that.

ODin flashing Android 2.3.5 Gingerbread I9000XXJVS Firmware loading

7) Once all set and ready, Hit the "START" button to begin installing the firmware. 

8) Just wait until the whole process completes it will take around 5 minutes, DO NOT TOUCH OR REMOVE the device while in flashing mode. You will eventually see a word "PASS" on ODIN when the flashing finishes. The phone will auto-reboot, once rebooted unplugged it from PC.

ODin flashing Android 2.3.5 Gingerbread I9000XXJVS Firmware  finishes
 The phone will then reboot once the firmware flashing finishes. Do Wipe data or factory reset by holding down the VOLUME UP, Home and POWER button, then select  
Wipe data/factory reset
Wipe Cache partition
Reboot system now
 
Full Reset Code

*2767*3855#
You may then confirm the Downloaded Firmware Version
Go to Settings > About Phone > Firmware Version
or by typing
*#1234#

Arabic Android 2.3.3 Gingerbread Firmware P1000JPJPC for Samsung Galaxy Tab P1000

Here's a new and latest firmware version of Android 2.3.3 Gingerbread that is built to support an Arabic language for Samsung Galaxy Tab GT-P1000. This is a stock ROM leaks that built for users from Middle East  with full Arabic support for the Galaxy Tab.
The firmware build number is P1000JPJPC witch a build date as of May 26 2011. Samfirmware
Samsung's official Middle East Gingerbread ROM 2.3.3 with full Arabic support for the Galaxy Tab.

The ROM image is untouched and does not contain any of the enhancements and additions like seen on a custom rom. We cannot confirm yet, if is this still a beta version or soon to be a final official release for Arabic Samsung Galaxy Tab, that has been pulled.

The  P1000JPJPC firmware has been released  by samfirmware due to massive websites making money of arabic ROMs for a very high price of around $100 per ROM. They intended to releases new Arabic ROMs just to stop others exploiting and making money with it. So everyone from Arabic regions can now download the stock ROM  for FREE!
Galaxy Tab GT-P1000 2.3.3 P1000JPJPC.

Note: This firmware  is not yet been tested since it's freshly new, and we doesn't know what comes up with this version yet. We will try to update this post if we can gather more feedbacks from trusted devs and advance users or testers. Just flash it at your risk.

via samfirmware.com.

Samsung Galaxy S Android 2.3.5 Gingerbread I9000XXJVS Firmware Download

The Android 2.3.5 Gingerbread for Samsung Galaxy S I9000 is finally  leaked. Today at samfirmware.com revealed the 2.3.5 and has been reportedly teamed up with Team Darky to released the latest firmware for Samsung Galaxy S device. The said stock ROM with build number I9000XXJVS with CSC = OXAJVS, is the first Android 2.3.5 version revealed with a  build date of   September 8, 2011.

Team darky will also releasing a custom ROM based on 2.3.5 I9000XXJVS and so we will stay tuned for that, for as of now the team are still working for it. 

Firmware details:
Samsung Galaxy S I9000Build Number: I9000XXJVS
Version: Android 2.3.5 Gingerbread 
Regions: Europe 


android 2.3.5. gingerbread XXJVS home screenshotandroid 2.3.5. gingerbread XXJVS firmware info screenshot

FIRMWARE: Samsung I9000 Firmware: I9000XXJVS Online! (CSC = OXAJVS) (Android 2.3.5)
DOWNLOAD LINK. http://hotfile.com/dl/129538506/0a079c6/I9000XXJVS.rar.html
Pass as normal: samfirmware.com

Build info:
  1. # begin build properties
  2. # autogenerated by buildinfo.sh
  3. ro.build.id=GINGERBREAD
  4. ro.build.display.id=GINGERBREAD.XXJVS
  5. ro.build.version.incremental=XXJVS
  6. ro.build.version.sdk=10
  7. ro.build.version.codename=REL
  8. ro.build.version.release=2.3.5
  9. ro.build.date=Thu Sep 8 20:20:49 KST 2011
  10. ro.build.date.utc=1315480849
  11. ro.build.type=user
  12. ro.build.user=se.infra
  13. ro.build.host=SEP-73
  14. ro.build.tags=release-keys
  15. ro.product.model=GT-I9000
  16. ro.product.brand=samsung
  17. ro.product.name=GT-I9000
  18. ro.product.device=GT-I9000
  19. ro.product.board=GT-I9000
  20. ro.product.cpu.abi=armeabi-v7a
  21. ro.product.cpu.abi2=armeabi
  22. ro.product.manufacturer=samsung
  23. ro.product.locale.language=en
  24. ro.product.locale.region=GB
  25. ro.wifi.channels=
  26. ro.board.platform=s5pc110
  27. # ro.build.product is obsolete; use ro.product.device
  28. ro.build.product=GT-I9000
  29. # Do not try to parse ro.build.description or .fingerprint
  30. ro.build.description=GT-I9000-user 2.3.5 GINGERBREAD XXJVS release-keys
  31. ro.build.fingerprint=samsung/GT-I9000/GT-I9000:2.3.5/GINGERBREAD/XXJVS:user/release-keys
  32. # Samsung Specific Properties
  33. ro.build.PDA=I9000XXJVS
  34. ro.build.hidden_ver=I9000XXJVS
  35. ro.build.changelist=565837
  36. ro.flash.resolution=720
  37. # end build properties

Languages:
- Čeština
- Dansk
- Deutsch (Deutschland)
- Deutsch (Österreich)
- Deutsch (Schweiz)
- English (Australia)
- English (Ireland)
- English (New Zeland)
- English (Sout Africa)
- English (United Kingdom)
- English (United States)
- Español (España)
- Español (Estados Unidos)
- Français (France)
- Hrvatski
- Icelandic
- Irish
- Italiano
- Kazakh
- Latviešu
- Lietuvių
- Macedonian
- Magyar
- Nederlands (België)
- Norwegian
- Polski
- Português
- Română
- Slovenčina
- Slovenščina
- Suomi
- Svrnska
- Türkçe
- Ελληνικά
- Български
- Русский
- српски
- YKPAÏHCBK
- 한국어

swype - 2.26.68.19015.1027.gti9000
- uk english (voice-to-text)
- us english (voice-to-text)
- nederlands (voice-to-text)
- français (voice-to-text)
- deutsch (voice-to-text)
- italiano (voice-to-text)
- 한국어 (voice-to-text)
- polski (voice-to-text)
- português europeu (voice-to-text)
- español (voice-to-text)
- türkçe (voice-to-text)

samsung keyboard:
- us english (voice-to-text)
- uk english (voice-to-text)
- 한국어 (voice-to-text)
- türkçe
- español (voice-to-text)
- português
- italiano(voice-to-text)
- français (voice-to-text)
- polski
- nederlands
- deutsch

See the step by step installation procedure using ODIN on Samsung Galaxy S.

via Samfirmware.com

How to Update Arabic Android 2.3.4 Gingerbread on Samsung Galaxy S SL I9003 JPKP5 Firmware

This is a step by step guide on how to manually upgrade or update the Samsung Galaxy S SL I9003 to the latest Android 2.3.4 Gingerbread Arabic firmware version released with build number I9003JPKP5. This ROM  has been reportedly an official released fro Arabic region users of  Galaxy SL I9003. This firmware were already been tested and works with better performance to the device.

Disclaimer: We are not responsible if you may bricked your phone by following this procedure, proceed at your own risk and take extra precautions. Remember this is a stock ROM, flashing this unto your Samsung galaxy S SL GT-I9003 needs extra precaution or you might end up bricking your phone, if you are not familiar in flashing by way of using Odin tool, do not attempt to try it unless you already done careful research and knows exactly what to do.

 Firmware details:
Build number: I9003JPKP5 - default Arabic language
Version: android 2.3.4 Gingerbread
BOOTLOADER: APBOOT_I9003JPKP5_CL482273_REV08_user_low_ship.tar .tar
PDA: CODE_I9003JPKP5_CL482273_REV08_user_low_ship.tar.t ar
CSC: I9003OJPKP6_CL491426_CSC.tar.tar
PHONE: MODEM_I9003JXKP3_REV_00_CL1040711.tar.tar

Download the following firmware files:

Samsund Galaxy S SL Arabic Firmware I9003JPKP5 Android 2.3.4 Gingerbread.
via samfirmware.com link.password is  samfirmware.com

PIT File: latona_20110114
ODIN: Odin3 v1.82.exe


ODIN Flashing Procedure to Upgrade Samsung Galaxy S SL I9003 to Android 2.3.4 Gingerbread I9003JPKP5 Firmware.

Important: Do have a back up copy of all your important data stored from your Galaxy S SL before proceeding. Just use any back-up application you may have, for it will be all wipe out after this process.
Ensure that the battery is well charge, much better if it's full.
Use a good working PC and a cable wire to avoid any interruption issues.


1. Download and extract the XXKP9 2.3.4 Gingerbread
2. Run ODIN3 v1.83.exe
3. Click PIT button then select and load the file: latona_20110114.pit
     Ensure that the Re-partition, Auto Reboot and F-Reset Time are checked.
3) Turn off your device or remove the battery for a seconds and put it back again, then you need to hold down the Volume Down button + the Home key button (the middle button) and then pressing the Power button. You will then see a downloading display like the image below.

Samsung galaxy S ODIN flashing 04 
Then connect the phone to PC. The ID:COM box will show you an indication if the device is already connected or detected on the PC.

5. Hit the "START" Button to begin flashing the PIT file.

ODIN flashing samsung galaxy S I9003 2.3.4 Gingerbread xxkp9
6. Once finish flashing the PIT file, on ODIN click the "RESET" button. (Re-Partition checkbox will automatically uncheck.)
7. Now load all the needed binary files on ODIN.

Click BOOTLOADER button and select this file: APBOOT_I9003JPKP5_CL482273_REV08_user_low_ship.tar

Click PDA button and select this file:
CODE_I9003JPKP5_CL482273_REV08_user_low_ship.tar

Click PHONE button and select this file:
MODEM_I9003JXKP3_REV_00_CL1040711.tar.tar

Click CSC button and select this file:
GT-I9003-CSC-I9003OJPKP6_CL491426_CSC.tar

Turn OFF the Samsung Galaxy I9003 or remove the battery and reinsert it back again. Then boot the phone into Download Mode again. (Volume Down+Home+Power button).
Hit "START" button to flash the Bootloader, PDA, Phone and CSC files.
Do not touch anything until it finishes, you will then see a word "PASS" on ODIN window when it successfully completes.

Once the flashing finishes remove your device Galaxy S SL I9003 from PC.You may then confirm and check your newly installed firmware through your About Phone Settings. Do a factory  reset to clear cache and have a newly fresh firmware update.
Don't hesitate to send us feedbacks or any further questions on our comment form below.

Android 2.3.4 Gingerbread for Verizon Droid Charge EP1W Official Build Publicly Released

The Android 2.3.4 Gingerbread firmware update for  Samsung Droid Charge has been publicly released by Teamblackhat. The said firmware leak with a build number of EP1W.
Some testers said that it doesn't seem to be a huge improvement over EP1Q, still has the hissing crackle from time to time during calls. The reboot is the only one I've had since being on GB, don't think it happened on EE4. Still getting random, short bursts of skipping garbledness while listening to Audiobooks from time to time. 



File name: CI510_VZW_EP1W_ALL_ONE-LTE-CP_REV3_user_CL485836_ship_debloated.tar.md5.7z
File size: 321.5 MB (337156287 bytes)
File hash: d91d396baabffdb5f82e69604a40cd25

Internal tar.md5: CI510_VZW_EP1W_ALL_ONE-LTE-CP_REV3_user_CL485836_ship_debloated.tar.md5
File size: 549.7 MB (576368742 bytes)
File hash: anf037e8517c3d5257709402c19db7eb93


Release notes: This is unofficial and a leak. Teamblackhat is not responsible for what you do to your phone. Installing this firmware will void your warranty and may cause harm to your device.

It includes Stock-Rooted, DeBloated-Rooted, and Radio only.
You can download it from the this thread mydroidworld.

How to Update/Upgrade Samsung Galaxy Fit S5670 to Android 2.3.4 Gingerbread ZCKP7 ASIA-China Firmware

This is the step by step procedure on how to manually flash and install the latest Android 2.3.4 Gingerbread firmware update for Samsung Galaxy Fit S5670. This firmware version with a build number of S5670ZCKP7 witch CSC file S5670ODDKA3 which is only for Chinese version of Galaxy Fit. This firmware packaged is an official release from Samsung Kies server over China regions of Samsung Galaxy Fit users a few weeks ago. Therefore, this version is not recommended to those who doesn't need a Chinese support language on their phone or you might end with some functionality issues.  If you want to upgrade your Galaxy Fit to 2.3.4 and only prepared English and other European language, I suggest to use the Android 2.3.4 Gingerbread S5670XWKQ2 Firmware which already proven as more stable firmware for Fit so far.

Disclaimer: We are responsible if anything happens to your device by using these method. Proceed at your own risk.

Firmware details:
S5670ZCKP7
CSC: CSC_S5670ODDKA3
OPS: BENI_V1.0.OPS
Android 2.3.4 Gingerbread
Region: China - Chinese support language
Released: August 16,2011
Download via samfrimware.com link
password is samfirware.com

ODIN Flasher Version: ODIN Multi Downloader v4.38

ODIN Guide Flashing Samsung Galaxy Fit S5670 with Android 2.3.4 Gingerbread ZCKP7 ASIA-China Firmware. 
Make sure to back up all of your important data including contacts/messages etc. as a precaution if something went wrong. Since this only a single packaged, there will be no wipe will occur unless you will do it perfectly.
1) Turn off your Samsung Galaxy Fit
2) Remove your SIM Card and SD Card, just to avoid any issues
3) Extract the previously downloaded S5670ZCKP7-S5670ZCKP7-S5670OZHKP7 firmware packaged.
4) Run ODIN 4.38.exe on your PC
5) Click the OPS button then select BENI_v1.0.ops from extracted archive and load it.
6) Tick on the One Packaged checkbox, Auto Reboot and Protect OPS were also remain checked.
7) Click on the One Packaged button then load S5670ZCKP7-S5670ZCKP7-S5670OZHKP7.tar file.
 8.Turn Off your Samsung Galaxy Fit, then reboot it into download mode by pressing POWER+VOLUME DOWN+OK Button simultaneously. Then Connect the device via USB into PC. On ODIN's COM Port Mapping will highlight into yellow color when the device is already detected.

 9) If all is set and ready: Press "Start" button and wait until the process completes.

ODin guide flashing Samsung Galaxy Fit  S5670 to Android 2.3.4 Gingerbread ZCKP7 ASIA-China Firmware
10) Once it finishes you will see a word "PASS" in odin, disconnect the phone,confirm the new downloaded firmware version by typing **#1234#. You may also do a full reset to have a fresh newly firmware installed by typing *2767*3855# just make sure to back up all of your important data including contacts/messages etc.